Synopsis On Box Shifting Machine

conveyor for box transmission using cam

Synopsis 

ON

Box Shifting Machinde

INTRODUCTION

Box shifting is our major project.
This device is operated by Motor. We are controlling this machine with ac motor . we know in these days time & Money is very important. In production centers there are more need of above works. So if we take all machine for all work then a large investment is required to purchased them and obviously space also required. So to keep this in mind we made this project. We can do all works in one machine. Hence we can save space and money as well as time also.

Components:-

6mm Iron strip 12*12 Inch 2

6mm Iron strip 6*30” 1

Ply Board 12mm

Sewing machine 220 V 1

Crown pinion 1

Center bearing 1

1’’ L-shap iron strip 16 fit

Pully 2” 1

Pully 7” 1

Bush 2

5 fit, 1” pipe 1

Working

We rotate a motor with 220 Volt. This rotation is transmitted to the machining head by a shaft and the required operation is carried out. First of all we rotate pinion. This pinion is mechanically attached with crown and a round plate. Crown is directly connected with a drill bit holder and round Plate changes the rotation energy into horizontal movement with required mechanism. With this shaft one side a hex-saw is attached and other side a shaper is attached. At end of shaft we can connect more tools.

conveyor for box transmission using cam

ADVANTAGES

  1. Money saving

  2. Time Saving

  3. Efficiency increasing

  4. More output in less time

application

Base on the application of the device, I would say that it is very useful for small industrials, Carpenters,